Filter by
Material:
Price
Manufacturers
more... less
Grip:
Color
more... less
Max. surface slope:

Crimps

OmHold Iron Edge 4 OmHold Iron Edge 4
Limited special offer
Out-of-StockSold out
Kč789.53 (tax incl.) Kč877.25
Three slopy crimps suitable for combination with wooden volumes. You can use this holds for hard routes. Fastened with wooden screws.  Bolts are not included. 
OmHold Floes 4 OmHold Floes 4
Limited special offer
Out-of-StockSold out
Kč1,742.40 (tax incl.) Kč1,936.00
Five crimps for hard overhang routes. Fastened with wooden screws. Bolt are not included. 
OmHold Floes 8 OmHold Floes 8
Limited special offer
Out-of-StockSold out
Kč1,252.35 (tax incl.) Kč1,391.50
Ten screw on crimps suitable for combination with wooden volumes, without structures they are great for hard routes where strength in the fingers is required.  Fastened with wooden screws. Bolt are not included. 
OmHold Floes 9 OmHold Floes 9
Limited special offer
Out-of-StockSold out
Kč1,252.35 (tax incl.) Kč1,391.50
Ten screw on crimps suitable for combination with wooden volumes, without structures they are great as footholds.  Fastened with wooden screws. Bolt are not included. 
OmHold Modular 5 OmHold Modular 5
Limited special offer
Out-of-StockSold out
Kč786.50 (tax incl.) Kč873.89
Six crimps suitable for combination with wooden volumes. Fastened with wooden screws. Bolts are not included. 
Out-of-StockSold out
Kč1,285.63 (tax incl.)
Ten screw on holds that can be combined with each other offer a pleasant and interesting grip and many variations of use. Fastened with wooden screws. Bolts are not included.
Out-of-StockSold out
Kč2,688.89 (tax incl.)
Ten screw on crimps. Holds are suitable to use around edges of climbing walls and volumes. The holds extend beyond the edge, creating a positive grip. Fastened with screws. Bolts are not included.  
Out-of-StockSold out
Kč1,144.18 (tax incl.)
This climbing set contains 5pcs of climbing holds with dual surface called Indy. Holds are approximately in the same sizes. They are suitable for vertical and very slightly overhang climbing lines. The shape of holds...
Out-of-StockSold out
Kč1,729.57 (tax incl.)
Lata dual PU is a large climbing hold with a grip-type crimp. The hold has a dual texture surface, made of POLYURETHANE and it is suitable for climbing profiles with an inclination of up to 30°. Fastened with screws....
Out-of-StockSold out
Kč1,303.84 (tax incl.)
This climbing set contains 5pcs of climbing holds with dual texture called Longaholic. Holds are approximately in the same sizes. They are suitable for vertical and very slightly overhanged climbing lines. The shape...
Out-of-StockSold out
Kč1,090.96 (tax incl.)
Screwers 3 is set with 11 small climbing holds. Holds are used like footholds, so they are usually installed on the lower part of the wall.  It is possible to install them on vertical walls as an easier alternative or...
Out-of-StockSold out
Kč1,037.74 (tax incl.)
Screwers 4 is set with 16 small climbing holds designed by climber and experienced climber route setter Petr Andrla. Holds are used like footholds, so they are usually installed on the lower part of the wall....
Out-of-StockSold out
Kč984.53 (tax incl.)
This climbing set contains 7pcs of climbing holds called Sticks. Holds are made of polyurethane. They are suitable for vertical and slightly overhang climbing lines.  Fastened with screws. Bolts are not included.
Out-of-StockSold out
Kč2,022.27 (tax incl.)
Beans 2 are set with 4pcs L – XL climbing holds with a simple design, the dual texture made of POLYURETHAN. It is suitable for climbing profiles up to 30° angle. Fastened with screws. Bolts are not included.  
Out-of-StockSold out
Kč1,436.88 (tax incl.)
This climbing set contains 7pcs of climbing holds called Cookies. Holds are made of polyurethane. They are suitable for vertical and slightly overhang climbing lines.  Fastened with screws. Bolts are not included.
Out-of-StockSold out
Kč3,538.97 (tax incl.)
Hangers are set with 3 L – XXL climbing holds with a simple design made of POLYURETHAN. It is suitable for climbing profiles up to 30° angle. Fastened with screws. Bolts are not included.  
Out-of-StockSold out
Kč1,197.39 (tax incl.)
Xenas are set with 4pcs M – L climbing holds with grip-type slopers and edges. It is suitable for climbing profiles up to 30° angle. Fastened with screws. Bolts are not included.  
Out-of-StockSold out
Kč3,932.50 (tax incl.)
Brushed sandstone texture jibs. Slopers and little tip dishes. Shaped to fit well on angular volumes. Not specifically Complex but many work well as blockers also.  Fastened with screws. KX001 Bolts are not included. 
Out-of-StockSold out
Kč2,577.30 (tax incl.)
These ten doubletexture M10 Incut crimps are fun, also in little bit overhanging walls. Thanks to the unique dragonskin Double Texture these holds are directional and give you the opportunity to set selective moves....
Out-of-StockSold out
Kč2,577.30 (tax incl.)
These 10 Dragonskin doubletexture crimps offer you a lot of possibilities due to their modular slidable design. With their additional screw-on holes you can also set with these holds outside the M10 Hole pattern....
Out-of-StockSold out
Kč2,093.30 (tax incl.)
These ten 10 beautiful doubletexture screw-on crimps are made using also our unique Dragonskin Double Texture. Due to this and also the modular design they offer you a wide variety of setting options. You can slide...
Out-of-StockSold out
Kč1,839.20 (tax incl.)
These five doubletexture Crimps are very comfortable and range from slopey to 90°. Thanks to the unique dragonskin Double Texture these holds are directional and give you the opportunity to set selective moves....
Out-of-StockSold out
Kč2,858.63 (tax incl.)
A set of ten unique screw-on holds. These can be used for hands and feet, although most climbers will find them very difficult for hand moves on a flat plane surface no matter what the angle is. They are very cool...
Out-of-StockSold out
Kč3,115.75 (tax incl.)
Ten awesome crimpers. These shapes have been used in high end competitions and make great little hand holds. Much more positive then DT Joe’s screw-ons 01. If you climb hard and have a spray wall or woodie, these are...
Out-of-StockSold out
Kč3,115.75 (tax incl.)
A set of five elegant, positive, first pad crimpers. These are good on any angle, but are great for the steep hard problems. Fastened with capheaded bolts M10. Bolts are not included.  
Out-of-StockSold out
Kč907.50 (tax incl.)
This range is designed to meet the requirements of bouldering and lead competitions. These are technical holds with subtle grips, requiring sometimes minute foot and hand adjustments before finding the optimal...
Out-of-StockSold out
Kč1,058.75 (tax incl.)
This range is designed to meet the requirements of bouldering and lead competitions. These are technical holds with subtle grips, requiring sometimes minute foot and hand adjustments before finding the optimal...
Out-of-StockSold out
Kč1,361.25 (tax incl.)
This range is designed to meet the requirements of bouldering and lead competitions. These are technical holds with subtle grips, requiring sometimes minute foot and hand adjustments before finding the optimal...
Out-of-StockSold out
Kč1,966.25 (tax incl.)
This range is designed to meet the requirements of bouldering and lead competitions. These are technical holds with subtle grips, requiring sometimes minute foot and hand adjustments before finding the optimal...
Out-of-StockSold out
Kč5,626.50 (tax incl.)
Ten fairly positive first pad crimps. Screw-on only, comfy crimps with a fine texture are easy on the skin but require some precision to to deal with the dual tex. Designed for higher end climbers, but depending on...
Out-of-StockSold out
Kč3,115.75 (tax incl.)
A set of five beautifully sculpted Granite patina crimps from Dan Yagmin. First pad, fairly positive crimps with an outdoor flair. Classic. Fastened with capheaded bolts M10. Bolts are not included.  
Out-of-StockSold out
Kč3,645.13 (tax incl.)
A set of five beautifully sculpted Granite patina crimps from Dan Yagmin. First pad, fairly positive crimps with an outdoor flair. Classic. Fastened with capheaded bolts M10. Bolts are not included.  
Out-of-StockSold out
Kč3,872.00 (tax incl.)
A set of ten sculpted granite holds. Originally shaped with the intent for foot use, these will undoubtedly be used as hands by those trying to get their crimp on. Enjoy. Fastened with capheaded bolts M10. Bolts are...
Out-of-StockSold out
Kč6,473.50 (tax incl.)
A set of four granite edge rails. These shapes are all positive, first pad, matchable edges. Fastened with capheaded bolts M10. Bolts are not included.  
Out-of-StockSold out
Kč1,557.88 (tax incl.)
Five slightly positive small half pad crimps in Genesis design. The Genesis series marks the start of Ben’s Hanna shaping career with Pusher. He wanted to create a new line that catered towards the high end World Cup...
Out-of-StockSold out
Kč3,282.13 (tax incl.)
Five classic shapes from the year 2000. This set has been remastered from the original mold and then hand polished to provide a modernized dual textured finish. Great for home walls or situations where you might want...
Out-of-StockSold out
Kč2,888.88 (tax incl.)
Ten screw-on shapes have been hand polished to create the dual textured finish. Very thin edges are great for experienced climbers and were designed with World Cup style problems in mind. Some of the shapes have a...
Out-of-StockSold out
Kč2,722.50 (tax incl.)
More or less incut, the 10 crimps included in this set are perfect for increasing the difficult of the routes you have in mind. Fastened with M10 capheaded bolts.  Great for setting routes that require an finger...
Out-of-StockSold out
Kč3,781.25 (tax incl.)
Boulder Legend Edges 1 set includes ten sharp edges similar in shape to the much larger Legend Ramp. Fairly technical, use these holds to set amazing moves on both boulder problems and routes. Fastened with M10...
Showing 241-287 of 287 item(s)

Menu

Share

QR code

Settings

Create a free account to save loved items.

Sign in

Create a free account to use wishlists.

Sign in